full strength to kill mildew in bathrooms, RV awnings, outside
of house etc. It will loosen rusted bolts.
CRUD REMOVER is non-flammable, biodegradable, re-usable, and can
be diluted for use in any cleaning application. Use in parts
cleaners. It can be applied in any manner - spray, brush, wipe,
or soak - and simply rinses off with water. Very few situations
require full strength usage.
CRUD REMOVER eliminates the work from any cleaning chore, saving
time and labor, and is currently being used in virtually all
areas of commerce and industry. USDA approved for use in food
areas such as commercial restaurants, food carts etc.
Cleans In Seconds!
• Biodegradable - contains no petroleum distillates.
• USDA - approved for degreasing/carbon removal.
• Contains no citrus solvent (terpenes).
• Cleans faster, better, and safer than solvents!
• Stronger than most all cleaning solvents!
• Non-flammable - made with water.
• Dilute with water to fit specific cleaning needs.
Uses - CRUD REMOVER is a powerful penetrating cleaner. Therefore
many applications lend themselves to the benefits of its
powerful cleaning action.
awnings and kills mildew, tile & grout, equipment, engines,
machinery, appliances, air conditioning units, fireplace
windows, restaurant grills, livestock barns, floors, carpeting,
clothing, shower stalls, boat bilge’s, whitewalls, general
building and grounds maintenance. Dissolves oil, grease, diesel,
soot, brake dust, animal renderings, blood, ink, algae, mildew,
soap scum, surface rust, floor wax, spray paint, bug splatter,
grass stains, etc., in seconds. Also Loosens rusted bolts.
for use as a grout & tile cleaner:
Read entire label, including all caution information, before
using. Grout may be cleaned using full strength for extremely
dirty areas to 10 parts water & one part cleaner (10:1) for
average soiled surfaces. Apply; wait between 30 seconds to one
minute for extremely dirty grout. Scrub with brush, wipe area
clean with wet cloth. Some stains may require a second
application. Clean tile using an 80:1 dilution. For extremely
dirty or greasy tile use 70:1. For laundry, wet stain or soiled
area, let set for three minutes, then launder as usual. CRUD
REMOVER will also strip paints in seconds to overnight soaking
depending upon the type of paint.
area to be cleaned. After several seconds, wipe with damp cloth
or rinse. Stubborn problems may require scrubbing, full strength
usage, longer application time, heat or re-application. Most
surfaces come clean in 10-15 seconds.
CAUTION: Full-strength usage can damage paint, anodized
trim, polished aluminum, and dyed vinyl’s. Test cloth items for