ALUMINUM POLISHING AND CLEANING TIPS

SECTION 1

Step 1- Clean surface using our Real Wheel Cleaner (SCP116), water rinse and dry surface

Step 2 - Clean surface with a good prep-solvent (dewaxer/degreaser). This will remove any build up you may have on the surface.

Step 3 - Use EASY Aluminum Polish (SCP111)
A. Follow the directions on the bottle. Shake well and shake occasionally during use.
B. Do one section of the wheel at a time.
C. Keep using the “black spot” on your rag and reapply polish as needed to the black spot.
D. Wipe off the residue with a clean, dry cloth while it is still moist. If it dries before you can get to it, reapply polish to that area. Then remove per directions.
E. Buff with a clean, dry microfiber cloth. Use cotton as a second choice.


SECTION 2
If your surface is heavily oxidized or you still have water spots and/or a haze on the surface there are two methods to use to renew your wheels.:

METHOD 1
Use our REAL Wheel Cleaner (SCP116) and #0000 steel wool together to remove any water spots and/or hazing. Keep the wheel surface and the steel wool wet with REAL Wheel Cleaner as you scrub. Continue until the hazing and/or water spots are gone. Rinse with water and dry surface periodically to check progress

Polish surface with Easy Aluminum Polish following directions.

METHOD 2
Apply our Speed Clay using the included Speed Sponge and Speed Clay directions (SCP124). This will remove heavy oxidation and with repeated application also remove hard water spots. Continue until the hazing and/or water spots are gone. Rinse with water and dry surface periodically to check progress

Polish surface with Easy Aluminum Polish following directions.